Peterson 5900E Disc Chipper
Overview
The Peterson 5900E disc chipper produces high quality paper chips when used with a Peterson 4800F debarker, or fuel chips as a stand alone fuel wood chipper.
The 5900E is powered by a Caterpillar C18, Tier IV, 755hp (563kW) engine, which is both fuel efficient and maintenance friendly.
The 5900E Disc Chipper can be configured with a three or four pocket disc, with several optional sheave sizes to make precisely the chip you need. Chipping production rates from 60 to 100 US tons (54 431to 90 718 kg) can be achieved depending on chip size. The productive 5900E’s large feed throat can accept up to 23 inch (58 cm) diameter trees or multiple smaller stems.
Downloads
Key Specifications
Dimensions | Specifications |
---|---|
Operating Length | 1006 cm |
Operating Width | 675 cm |
Operating Height | 526 cm |
Travel Width | 290 cm |
Travel Length | 882 cm |
Travel Height | 414 cm |
Front to 5th Wheel | 46 cm |
5th Wheel to Center Axle | 575 cm |
5th Wheel to Rear Axle | 700 cm |
Axle Spacing | 125 cm |
Kingpin to Rear Bumper | 792 cm |
5th Wheel Height | 125 cm |
Dimensions | Specifications |
---|---|
Operating Length | 33' |
Operating Width | 22' 1 3/4" |
Operating Height | 17' 3" |
Travel Width | 9' 6" |
Travel Length | 28' 11" |
Travel Height | 13' 7" |
Front to 5th Wheel | 18" |
5th Wheel to Center Axle | 18' 10 1/2" |
5th Wheel to Rear Axle | 23' |
Axle Spacing | 49" |
Kingpin to Rear Bumper | 26' |
5th Wheel Height | 4' 1 1/2" |
Weights | Specifications |
---|---|
Total Weight (approximate) | 21,133 kg |
5th Wheel Weight (approximate) | 7,890 kg |
Tandem Axle Weight (approximate) | 13,243 kg |
Wheel Base (2 Axle) | 701 cm |
Weights | Specifications |
---|---|
Total Weight (approximate) | 46,600 lbs |
5th Wheel Weight (approximate) | 17,400 lbs |
Tandem Axle Weight (approximate) | 29,200 lbs |
Wheel Base (2 Axle) | 23' |
Powertrain | Specifications |
---|---|
Engine | Caterpillar C18 Tier IV, 563 kW |
Clutch | PT Tech HPTO 14 FX |
Fuel Tank Capacity | 1135 L |
Main Hydraulic Tank Capacity | 416 L |
System Controls | Specifications |
Peterson Adaptive Control System | Checkmark |
Radio Remote | Checkmark |
Powertrain | Specifications |
---|---|
Engine | Caterpillar C18 Tier IV, 755 hp |
Clutch | PT Tech HPTO 14 FX |
Fuel Tank Capacity | 300 gallons |
Main Hydraulic Tank Capacity | 110 gallons |
System Controls | Specifications |
Peterson Adaptive Control System |
Checkmark
|
Radio Remote |
Checkmark |
Feed System | Specifications |
---|---|
Feed Opening | 58 cm |
Feed Speed Range | up to 47 m/min |
Feed System | Specifications |
---|---|
Feed Opening | 23 in |
Feed Speed Range | up to 155 ft/min |
Chipper | Specifications |
---|---|
Chipper Disc | 167 cm diameter |
Knife Pockets | 3 or 4 |
Knife System | Babbitt or Key Knife™ |
Chip Size | 6 to 25 mm |
Chipper | Specifications |
---|---|
Chipper Disc | 66 in diameter |
Knife Pockets | 3 or 4 |
Knife System | Babbitt or Key Knife™ |
Chip Size | 1/4" to 1" |
All specifications subject to change without notice.
Features
Media Gallery
Find Astec product availability nearby
